Allied Telesis AT-S63 - Manual (Page 467)

AT-S63 Management Software Menus Interface User’s Guide
Section III: SNMPv3 467
Display SNMPv3 User Table Menu” on page 465. Or, from the Main
menu type 5->1->1->8->6.
2. From the Display SNMPv3 Table menu, type 2 to select Display
SNMPv3 View Table.
The Display SNMPv3 View Table menu is shown in Figure 158.
Figure 158. Display SNMPv3 View Table Menu
Displaying the
Display SNMPv3
Access Table
Menu
This section describes how to display the Display SNMPv3 Access Table
menu. For information about the SNMPv3 Access Table parameters, see
“Creating an SNMPv3 Access Table Entry” on page 399.
To display the Display SNMPv3 Access Table menu, perform the following
procedure.
1. Follow steps 1 through 5 in the procedure described in “Displaying the
Display SNMPv3 User Table Menu” on page 465. Or, from the Main
Menu type 5->1->1->8->6.
2. From the Display SNMPv3 Table menu, type 3 to select Display
SNMPv3 Access Table.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display SNMPv3 View Table
View Name ................... tcp
Subtree OID ................. 1.3.6.1
Subtree Mask ................
View Type ................... Included
Storage Type ................ NonVolatile
Row Status .................. Active
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?