Allied Telesis AT-S63 - Manual (Page 166)

Chapter 9: Networking Stack
166 Section I: Basic Operations
The Display ARP Table menu is shown in Figure 51.
Figure 51. Display ARP Table Menu
The Display ARP Table menu displays a table that contains the
following columns of information: The information in this table is for
viewing purposes only.
Interface
The network interface of a table entry. The switch has two network
interfaces. The “loopback” designation represents the interface used
by the switch for internal diagnostics. The “eth0” designation
represents the Ethernet network interface.
IP Address and
MAC Address
The IP addresses and their corresponding MAC addresses.
Type
The type of ARP entry. An entry can be permanent, meaning it can
never be deleted from the table, or temporary. Only the “loopback”
entry is permanent. All “eth0” entries are temporary.
Deleting an ARP
Table Entry
To remove a dynamic or static ARP entry from the ARP cache, perform
the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 46.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display ARP Table
Interface IP Address MAC Address Type
---------------------------------------------------------
loopback
127.0.0.1 00:00:00:00:00:00 PERMANENT
eth0 149.22.22.22 00:30:84:32:8A:5B TEMPORARY
eth0 149.22.22.1 00:30:84:32:12:42 TEMPORARY
eth0 149.22.22.101 00:30:84:32:8A:1B TEMPORARY
eth0 149.22.22.27 00:30:84:32:6A:11 TEMPORARY
eth0 149.22.22.86 00:30:84:32:81:22 TEMPORARY
U - Update Display
R - Return to Previous Menu
Enter your selection?