Allied Telesis AT-S63 - Manual (Page 124)

Chapter 6: Port Parameters
124 Section I: Basic Operations
Up - Indicates that a valid link exists between the port and the end
node.
Down - Indicates that the port and the end node have not established a
valid link.
Neg
The status of autonegotiation on the port. Possible values are:
Auto - Indicates that the port is using autonegotiation to set operating
speed and duplex mode.
Manual - Indicates that the operating speed and duplex mode have
been set manually.
MDIO
The operating configuration of the port. Possible values are Auto, MDI,
MDI-X. The status Auto indicates that the port automatically
determines the appropriate MDI or MDI-X setting.
Speed
The operating speed of the port. Possible values are:
10 - 10 Mbps
100 - 100 Mbps
1000 - 1000 Mbps (Gigabit Ethernet ports only)
Duplex
The duplex mode of the port. Possible values are half-duplex and full-
duplex.
PVID
The VLAN identifier (VID) of the VLAN in which the port is an untagged
member. This column does not include the VIDs of the VLANs where
the port is a tagged member.
Port Type
The port type, based on the speed.