Allied Telesis AT-S63 - Manual (Page 358)

Chapter 18: IGMP Snooping
358 Section II: Advanced Operations
Displaying a List of Host Nodes
You can use the AT-S63 management software to display a list of the
multicast groups on a switch, as well as the host nodes. To display the list,
perform the following procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 131 on page
354
2. From the Advanced Configuration menu, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 132 on
page 354.
3. From the IGMP Snooping Configuration menu, type 6 to select View
Multicast Hosts List.
The View Multicast Host List menu is shown in Figure 133.
Figure 133. View Multicast Hosts List Menu
The View Multicast Hosts List menu displays a table with the following
columns of information:
Multicast Group
The multicast address of the group.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
View Multicast Hosts List
Number of Multicast Groups: 4
VLAN Port/ IGMP Exp.
MulticastGroup ID TrunkID HostIP Ver Time
------------------------------------------------------------
01:00:5E:00:01:01 1 6 172.16.10.51 v2 21
01:00:5E:7F:FF:FA 1 5 149.35.200.75 v2 11
149.35.200.65 v2 65
01:00:5E:00:00:02 1 17 149.35.200.69 v2 34
01:00:5E:00:00:09 1 14 172.16.10.51 v2 32
U - Update Display
R - Return to Previous Menu
Enter your selection?