Allied Telesis AT-S63 User Manual
Page 211

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
211
The Downloads and Uploads menu is shown in Figure 63 on page 207.
5. From the Downloads and Uploads menu, type 1 to select Download
Application Image/Bootloader.
The following prompt is displayed:
Only TFTP downloads are available for a Telnet access
TFTP Server IP address:
6. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
7. Enter the directory path and file name of the image file or configuration
file that you want to download.
The following message is displayed:
Getting the file from Remote TFTP Server - Please wait
...
8. If you have not already done so, start the TFTP server software.
After the switch has downloaded the image file, the following message
is displayed:
File received successfully!
Note
The switch validates the file and then begins the initialization
process of writing the image to flash. The switch does not forward
any network traffic during the initialization process. After the
management software is initialized, the switch automatically resets.