Allied Telesis AT-S63 - Manual (Page 734)

Chapter 32: PKI Certificates and SSL
734 Section VII: Management Security
The Add Certificate menu is shown in Figure 260.
Figure 260. Add Certificate Menu
6. Type 1 to select Certificate Name.
The following prompt is displayed:
Enter file name (*.key) ->
7. Enter a name for the certificate.
This is the name for the certificate as it will appear in the certificate
database list. You can enter up to 24 alphanumeric characters. Spaces
are allowed. No extension is needed.
You might want the name to include the filename of the certificate in
the file system. This will make it easier for you to correlate a certificate
in the database with its corresponding file in the file system. Here is an
example:
Switch 12 - sw12.cer
8. Type 2 to select (certificate) State. The possible settings are:
Trusted
This value indicates you have verified that the certificate is from a
trusted CA. This is the default.
Untrusted
This value indicates the certificate is from an untrusted CA either
because you have not verified the CA or you have verified the CA is
untrusted.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Add Certificate
1 - Certificate Name .............
2 - State ........................ Trusted
3 - Type ......................... EE
4 - File Name ....................
5 - Add Certificate
R - Return to Previous Menu
Enter your selection?