Allied Telesis AT-S63 - Manual (Page 293)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 293
Configuring Denial of Service Defense
To configure DoS defense, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security Configuration menu, type 2 to select Denial of
Service (DoS).
The Denial of Service (DoS) menu is shown in Figure 100.
Figure 100. Denial of Service (DoS) Menu
3. If you are implementing the SMURF or Land defense, you must
provide the IP address of a node connected to the switch and a subnet
mask. For the Land defense, you must also specify an uplink port. To
do this, complete the following steps. Otherwise, go to step 4.
a. Type 1 to select LAN IP Subnet.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Denial of Service (DoS)
1 - LAN IP Subnet
2 - SYN Flood Configuration
3 - Smurf Configuration
4 - Land Configuration
5 - Teardrop Configuration
6 - Ping of Death Configuration
7 - IP Option Configuration
R - Return to Previous Menu
Enter your selection?