Displaying the aces – Allied Telesis AT-S63 User Manual
Page 785

AT-S63 Management Software Menus Interface User’s Guide
Section VII: Management Security
785
Displaying the ACEs
To display the ACEs, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 46.
2. From the System Administration menu, type 7 to select Management
ACL menu.
The Management ACL menu is shown in Figure 275 on page 780.
3. From the Management ACL menu, type 4 to select Display All
Management ACL Entries.
A list of the ACEs along with the specifics of each ACE is displayed at
the bottom of the Management ACL menu, as shown in Figure 276.
Figure 276. Management ACL Menu with ACEs Display
The Management ACL menu provides the following information about
the ACEs:
IP Address
The IP address of a management station.
Mask
The parts of the IP address the switch is filtering on.
Protocol
The protocol used for management packets.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
Management ACL Menu
Configuring Management ACL
1 - Management ACL Status ........... Disabled
2 - Add Management ACL Entry
3 - Delete Management ACL Entry
4 - Display All Management ACL Entries
R - Return to Previous Menu
Enter your selection? 4
IP Address
Mask
Protocol
Interface
133.22.145.18
255.255.255.255
TCP & UDP
All
Press any key to continue