Working with the compact flash card, Displaying compact flash card information – Allied Telesis AT-S63 User Manual
Page 201
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
201
Working with the Compact Flash Card
Some AT-9400 Series switches contain a compact flash card slot, into
which you can put a compact flash card. You can then copy files such as
configuration files onto the compact flash card, take the card to other
switches that have compact flash card slots, and copy files from the
compact flash card to that switch through a local connection. The compact
flash card is also a medium onto which you can store system files as
backups.
Displaying
Compact Flash
Card Information
To display information about the compact flash card, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown Figure 4 on page 46.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 53.
3. From the System Utilities menu, type 1 to select File Operations.
The FIle Operations menu is shown in Figure 56 on page 184.
4. From the File Operations menu, type C to select Display Compact
Flash Information.
The Display Compact Flash Information menu is shown in Figure 61.