Allied Telesis AT-S63 - Manual (Page 826)

Chapter 42: 802.1x Port-based Network Access Control Commands
826 Section VIII: Port Security
SHOW PORTACCESS|PORTAUTH
Syntax
show portaccess|portauth[=8021x|macbased] [config] [status]
Parameters
portaccess or Specifies the authenticator method of a
portauth port. Options are:
8021x Displays information on the 802.1x
authenticator ports.
macbased Displays information on the MAC
address-based authenticator ports.
config Displays the settings of the authenticator and
supplicant ports.
status Displays the status of the authenticator and
supplicant ports.
Description
This command displays the port roles. Figure 91 is an example of the
information displayed by this command.
Figure 91. SHOW PORTACCESS|PORTAUTH Command
Command
Available
AlliedWare Plus
802.1x Authentication Information
---------------------------------------------------
SystemAuthControl.................. Disabled
Number of 802.1x Supplicants....... 0 (480)
Port Role Supplicant Protocol
Mode Version
---------------------------------------------------
1
Authenticator Single 1
2 Authenticator Single 1
3 Authenticator Single 1
4 Authenticator Single 1
5 Authenticator Single 1
6 Authenticator Single 1
7 Authenticator Single 1
8 Authenticator Single 1