Allied Telesis AT-S63 - Manual (Page 431)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 431
Mode
Configure mode
Description
There are several differences between this command and the standard
command. First, this command automatically activates group link control
when you create the first group. The standard commands have a separate
command for activating the feature. Second, this command creates groups
without any ports. You have to add the ports separately using the GROUP
LINK CONTROL UPSTREAM|DOWNSTREAM command. For
instructions, refer to the AlliedWare Plus command in “ADD GLC” on
page 428.
Examples
This command creates a group with the ID number 1:
awplus> enable
awplus# configure terminal
awplus(config)# group link control 1
This command creates a group with the ID number 3:
awplus> enable
awplus# configure terminal
awplus(config)# group link control 3