Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Features 139
DESTROY SNMP COMMUNITY
Syntax
destroy snmp community=" community "
Parameter
community Specifies an SNMP community string to delete from the
switch. This parameter is case sensitive. The name
must be enclosed in double quotes if it contains a space
or special character, such as an exclamation point.
Otherwise, the quotes are optional.
Description
This command deletes SNMP community strings from the switch. The IP
addresses of management stations and SNMP trap receivers assigned to
a deleted community string are deleted as well.
Example
This command deletes the community string “wind44”:
destroy snmp community=wind44
AlliedWare Plus
Command
Syntax
no snmp-server community community
Mode
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
This example deletes the “pla178ta” community string:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server community pla178ta
Command
Available
AlliedWare Plus