Allied Telesis AT-S63 - Manual (Page 65)

65
Chapter 3
Basic Switch Commands
This chapter contains the following commands:
 “AWPLUS” on page 66
 “DISABLE TELNET” on page 67
 “ENABLE TELNET” on page 68
 “PING” on page 69
 “RESET SWITCH” on page 70
 “RESET SYSTEM” on page 71
 “RESTART REBOOT” on page 73
 “RESTART SWITCH” on page 75
 “SET ASYN” on page 79
 “SET DATE” on page 81
 “SET PASSWORD MANAGER” on page 82
 “SET PASSWORD OPERATOR” on page 83
 “SET SWITCH CONSOLETIMER” on page 84
 “SET SYSTEM” on page 85
 “SET TELNET INSERTNULL” on page 88
 “SET TIME” on page 89
 “SET USER PASSWORD” on page 90
 “SHOW ASYN” on page 91
 “SHOW CONFIG DYNAMIC” on page 92
 “SHOW CONFIG INFO” on page 95
 “SHOW SWITCH MODULE” on page 96
 “SHOW SYSTEM” on page 99
 “SHOW SYSTEM VERSION” on page 101
 “SHOW TIME” on page 102
Layer 2+ Models
AT-9408LC/SP
AT-9424T/GB
AT-9424T/SP
Basic Layer 3 Models
AT-9424T
AT-9424T/POE
AT-9424Ts
AT-9424Ts/XP
AT-9448T/SP
AT-9448Ts/XP
Supported on:
Yes*
Yes*
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
(*The Layer 2+ switches do
not support the AlliedWare
Plus commands or the
standard AWPLUS command.)
AT-9400Ts Stacks Yes