Allied Telesis AT-S63 - Manual (Page 190)

Chapter 9: Port Statistics Commands
190 Section I: Basic Operations
SHOW SWITCH PORT COUNTER
Syntax
show switch port= port counter
Parameter
port Specifies the port whose statistics you want to view.
You can specify more than one port at a time. To view
all ports, do not specify a port.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted and
received, and the number of CRC errors. For an example of the display
and definitions of the statistics, refer to “SHOW SWITCH MODULE
COUNTER” on page 187.
Examples
The following command displays the operating statistics for port 14:
show switch port=14 counter
The following command displays the operating statistics for all the ports:
show switch port counter
AlliedWare Plus
Command
Syntax
show statistics port
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
The following command displays the statistics for ports 21 and 23:
awplus# show statistics 21,23
Command
Available
AlliedWare Plus