Allied Telesis AT-S63 - Manual (Page 818)

Chapter 42: 802.1x Port-based Network Access Control Commands
818 Section VIII: Port Security
AlliedWare Plus
Commands
Syntax for 802.1x Username and Password Authentication
To set a port to the authenticator role for 802.1x username and password
authentication and to specify the authenticator state:
dot1x port-control auto
dot1x port-control force-authorized
dot1x port-control force-unauthorized
To remove a port from the authenticator role:
no dot1x port-control
To configure the authenticator port parameters:
dot1x port-control mode single|multi
dot1x quiet-period
quietperiod
dot1x timeout tx-period txperiod
dot1x timeout re-authperiod reauthperiod
dot1x timeout supp-timeout supptimeout
dot1x timeout server-timeout servertimeout
dot1x max-req maxreq
dot1x port-control dir in
dot1x port-control dir both
To control reauthentication, which determines whether supplicants must
periodically reauthenticate:
dot1x reauthentication
no dot1x reauthentication
To enable or disable the piggyback mode:
dot1x piggyback
no dot1x piggyback
To enable or disable the secure VLAN mode:
dot1x secure-vlan
no dot1x secure-vlan
To control whether an authenticator port’s VLAN assignment is set by the
user account on the RADIUS server:
dot1x dynamic-vlan-creation enable
dot1x dynamic-vlan-creation disable
To return the parameters to their default values:
no dot1x port-control
no dot1x quiet-period
no dot1x timeout tx-period
no dot1x timeout re-authperiod
no dot1x timeout supp-timeout