Allied Telesis AT-S63 - Manual (Page 346)

Chapter 18: Classifier Commands
346 Section II: Advanced Operations
 Number of Active Associations - The number of active ACLs and QoS
policy assignments where the classifier is currently assigned. An
active ACL or policy is assigned to at least one switch port.
You can use this number together with the Number of References to
determine the number of inactive ACLs and policies for a classifier. For
example, if Number of References for a classifier is 4 and the Number
of Active Associations is 3, one of the ACL or QoS policy assignments
for the classifier is not assigned to a switch port.
Examples
This command displays all of the classifiers on the switch:
show classifier
This command displays the details for just classifier ID 12:
show classifier=12
AlliedWare Plus
Command
Syntax
show access-list id_number
Mode
User Exec mode and Privileged Exec mode
Description
This command displays both the classifiers and the access control lists.
Examples
This command displays all the classifiers and the access control lists:
awplus# show access-list
This command displays the classifier and the access control list with the
ID number 4:
awplus# show access-list 4