Allied Telesis AT-S63 - Manual (Page 410)

Chapter 21: Quality of Service (QoS) Commands
410 Section II: Advanced Operations
a flow group overrides a ToS value specified at the
traffic class or policy level.
movetostopriority Replaces the value in the 802.1p priority field with the
value in the ToS priority field on IPv4 packets. Options
are:
yes, on, true Replaces the value in the 802.1p priority
field with the value in the ToS priority
field on IPv4 packets.
no, off, false Does not replace the preexisting 802.1p
priority level This is the default.
moveprioritytotos Replaces the value in the ToS priority field with the
802.1p priority field on IPv4 packets. Options are:
yes, on, true Replaces the value in the ToS priority
field with the 802.1p priority field on IPv4
packets.
no, off, false Does not replace the ToS priority field.
This is the default.
sendtomirror Copies the traffic that meets the criteria of the
classifiers to a destination mirror port. Options are:
yes, on, true Copies the traffic that meets the criteria
of the classifiers to a destination mirror
port. You must specify the destination
port by creating a port mirror, as
explained in Chapter 13, “Port Mirroring
Commands” on page 237.
no, off, false Does not copy the traffic to a destination
mirror port. This is the default.
trafficclasslist Specifies the traffic classes to be assigned to the policy.
The specified traffic classes must already exist.
Separate multiple IDs with commas (e.g., 4,11,13).
redirectport Specifies the port to which the classified traffic from the
ingress ports is redirected.
ingressport Specifies the ingress ports for the policy. For
instructions on how to enter the ports, refer to “Port
Numbers in Commands” on page 48. To remove all of
the current ingress ports, use the NONE option. To add
all of the ports as ingress ports, use the ALL option.