Enable lacp, Alliedware plus command – Allied Telesis AT-S63 User Manual

Page 228

Text mode
Original mode

Chapter 12: LACP Port Trunking Commands

228

Section I: Basic Operations

ENABLE LACP

Syntax

enable lacp

Parameters

None.

Description

This command activates LACP on the switch. The default is disabled.

Example

The following command activates LACP:

enable lacp

Equivalent Command

set lacp state=enable

For information, see “SET LACP STATE” on page 232.

AlliedWare Plus

Command

The AlliedWare Plus command interface does not have a separate
command to enable LACP. LACP is automatically enabled when you use
the CHANNEL-GROUP command and create the first aggregator on the
switch. For instructions, refer to the AlliedWare Plus command in “ADD
LACP PORT” on page 220.

Command

Available

AlliedWare Plus