Allied Telesis AT-S63 - Manual (Page 81)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 81
SET DATE
Syntax
set date= dd-mm-yyyy
Parameter
date Specifies the date for the switch in day-month-year
format.
Description
You use this command to manually set the date on the switch if you are
not using an SNTP server. The switch maintains the date even when the
unit is powered off or reset.
Example
This command sets the switch’s date to December 11, 2004:
set date=11-12-2004
AlliedWare Plus
Command
Syntax
clock set hh:mm:ss dd-mm-yyyy
Mode
Privileged Exec mode
Description
This AlliedWare Plus command is used to manually set both the date and
the time. The command must include both the date and the time.
Example
This example sets the time to 2:15 pm and the date to February 4, 2009:
awplus> enable
awplus# clock set 14:15:0 4-2-2009
Command
Available
AlliedWare Plus