Hba (if an fc-san is used) -18, Nic (if an ip-san is used) -18 – HP Hitachi Dynamic Link Manager Software User Manual

Page 90

Storage systems that are used must have a dual controller configuration. If

you use them in a HUB-connected environment, specify a unique loop ID for

all the connected hosts and storage systems. For details on the microprogram

version required for using HDLM, see HDLM Release Notes. For details on the

settings information for storage system, see the maintenance documentation

for the storage system.

Note:

For details on storage systems applicable to a Hitachi Compute Blade

environment or boot disk environment, see the following according to

your OS and version:

HBA (If an FC-SAN Is Used)

For details about the supported HBAs, see HDLM Release Notes.

NIC (If an IP-SAN Is Used)

For details about the supported NICs, see HDLM Release Notes.

When Handling Intermediate Volumes Managed by Hitachi RapidXchange

The following table lists the related programs that are required when you

convert data with intermediate volumes managed by Hitachi RapidXchange.

3-18

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide for Linux

This manual is related to the following products: