HP Hitachi Dynamic Link Manager Software - Manual (Page 455)

Displayed item
Description
No summary
displayed
Summary
displayed
- Paths Total number of the paths recognized by HDLM
for the LU to be displayed.
- OnlinePaths Number of available paths in the displayed
paths, indicated by a decimal number. When the
value of Paths equals the value of OnlinePaths,
all paths are online. If the value of OnlinePaths
is less than that of Paths, some paths are
offline. In this case, you should check the offline
paths and take appropriate action for any paths
that have an error status.
Legend:
- : Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.
#3
This storage system applies when the dynamic I/O path control function is
disabled.
To display corresponding information about an HDLM device, SCSI device, and
LDEV
-drv
Using this parameter displays the PathID, the HDLM device, SCSI device
for the HDLM device, and information on the LDEV in the storage system
(storage system model name, serial number, and LU number, separated
by period).
For details on the contents of each display item, see
Table 6-18 To display
corresponding information about an HDLM device, SCSI device, and LDEV
on page 6-62 .
-t
Does not display the title for each information item.
Command Reference
6-61
Hitachi Dynamic Link Manager User Guide for Linux ®