HP Hitachi Dynamic Link Manager Software - Manual (Page 573)

Message ID Message Text Explanation
/var/tmp/hdlm_license
KAPL09116-W The command could not be
installed. (command = aa...aa)
Details
The output HDLM command
cannot be used.
aa...aa: Command name
Action
The output command can be
executed by using a different
name. If you want to use the
output name, use the output
command to overwrite or re-
install.
KAPL09121-E aa...aa is not present at bb...bb. Details
aa...aa: Installer name
bb...bb: Installer path
Action
Install HDLM from the DVD-ROM.
When you are attempting to install
HDLM from the directory to which
the DVD-ROM was copied, make
sure that all the contents of the
DVD-ROM have been copied to
that directory, and then retry the
installation.
KAPL09135-E One of the following was
executed at the same time as
an HDLM command set -lic
operation: another set -lic
operation, or an update of the
license for an update
installation.
Action
Check the license by using the
HDLM command's view -sys -
lic operation. If necessary,
update the license by using the
set -lic operation during or
after the installation. If the same
error message is output, contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Do not perform the following
operation:
Execution of the HDLM command's
set -lic operation simultaneously
with an update of the license for
an upgrade installation
KAPL09142-E HDLM aa...aa cannot be
performed. Wait a while, and
then perform aa...aa again.
Error Code =bb...bb
Details
HDLM cannot be installed or
removed.
aa...aa : "installation" or "remove"
bb...bb : Internal code (decimal
(base-10) number)
Action
Messages
8-61
Hitachi Dynamic Link Manager User Guide for Linux ®