HP Hitachi Dynamic Link Manager Software - Manual (Page 646)

Message ID Message Text Explanation
processes, and then re-execute the
dlmsetopt utility.
KAPL12566-E The utility for setting
HDLM driver option was
executed and ended
abnormally last time.
Action
Compare the contents of the /etc/
modprobe.conf file and the /etc/opt/
DynamicLinkManager/DLMSETOPT/
modprobe.conf file. According to the
result, perform the following procedures:
The /etc/opt/DynamicLinkManager/
DLMSETOPT/modprobe.conf file was
copied for backup by HDLM before the
utility for setting HDLM driver option
(dlmsetopt) is to be executed. If Red
Hat Enterprise Linux 6 is being used, /
etc/modprobe.conf must be read as /
etc/modprobe.d/dlmdrvopt.conf.
¢
When the file contents match:
Delete the /etc/opt/
DynamicLinkManager/DLMSETOPT/
modprobe.conf file. Then, re-
execute the dlmsetopt utility to
make sure that an error does not
occur.
¢
When the file contents do not
match:
Overwrite the /etc/modprobe.conf
file with the /etc/opt/
DynamicLinkManager/DLMSETOPT/
modprobe.conf file, and then re-
configure the content that was
configured in the /etc/
modprobe.conf file according to the
user's environment. Then, delete
the /etc/opt/
DynamicLinkManager/DLMSETOPT/
modprobe.conf file. Finally, re-
execute the dlmsetopt utility to
make sure that an error does not
occur.
KAPL12567-E The version of the kernel
supported by the installed
HDLM does not match the
currently running kernel
version.
Details
The version of the kernel to which
installed HDLM has adjusted and the
kernel that is running now is not
corresponding. There is a possibility of
installing the package of the kernel after
installing HDLM.
Action
Install HDLM that adjusts to the kernel
that is running now.
KAPL12568-E The HDLM file is invalid.
File name = aa...aa
Details
8-134
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®