HP Hitachi Dynamic Link Manager Software - Manual (Page 475)

Output directory #1 Files Explanation
dlnkmgr1.log,
dlnkmgr2.log Process-specific-trace information
file
hdlmtr1.log
:
hdlmtr64.log Trace file
/var/opt/
DynamicLinkManager/log/
mmap dlnkmgr.mm Process-specific-trace related file
hdlmtr.mm Trace management file
/var/spool/cron All files User-defined cron entry information
(when using Red Hat Enterprise
Linux)
/var/spool/cron/tabs All files User-defined cron entry information
(when using SUSE LINUX Enterprise
Server)
/var/tmp/hdlminstlog All subdirectories and
files
Installation log information
#1
Each output directory is created in the directory that is specified when the
user expands the getras.tar.gz file.
#2
Information about the rules files specified for udev_rules= in the
udev.conf file is also collected.
If a file name is specified, information about that file is collected.
If a directory name is specified, information about the *.rules files in
that directory is collected.
#3
The value N depends on the setting in the dlmwebagent.properties file.
The default is 2.
Table 7-4 Information Stored in the getras.tar.gz File, which Is Recorded
by the OS and HDLM Commands When the DLMgetras Utility Is Executed
Executed command Files Explanation
/bin/df bdf.txt Disk usage of the file system
/bin/dmesg dmesg.txt System diagnostic message
/bin/ls -altR /dev dev_dsk.txt List of disks to be handled as
a block-type device
/bin/ls -altR /dev/raw dev_raw.txt List of disks to be handled as
a character-type device
/bin/ls -altR /etc/rc.d rc.txt List of script files (when using
Red Hat Enterprise Linux)
Utility Reference
7-15
Hitachi Dynamic Link Manager User Guide for Linux ®