HP Hitachi Dynamic Link Manager Software - Manual (Page 498)

1 to 3,600: Timeout value (in seconds)
If the following values are specified, the message KAPL12553-W is
displayed and then the processing ends:
• 0
• Value of -1 or less
• Value more than 3,600
• Non-numeric value.
-inqr
Specify the number of retries of the SCSI INQUIRY command. In HDLM,
the default number of retries is 1. Note that the number of retries
specified by using the -inqr parameter only applies to the SCSI INQUIRY
command executed from HDLM. This value has no effect on the SCSI
INQUIRY command executed from another application.
InquiryRetry
Specify a numeric value in the range from -1 to 2,147,483,646.
-1: This sets the number of retries to 1, which is HDLM's default
value.
0: The system does not retry.
1 to 2,147,483,646: The system retries the specified number of
times.
If the following values are specified, the KAPL12553-W message is
displayed and then processing ends:
• Value of -1 or less
• Value more than 2,147,483,646
• Non-numeric value
-prsup
Specify this parameter when linking with a cluster that supports
persistent reservations (RHCM).
ReserveStatus
Specify on or off. The default value is off.
on: Links with a cluster that supports persistent reservations.
off: Does not link with a cluster that supports persistent reservations.
You can use this parameter for the following OSs:
- Red Hat Enterprise Linux 5
- Red Hat Enterprise Linux 6
- Oracle Enterprise Linux 5
-h
Displays the format of the dlmsetopt utility for setting the HDLM driver
option.
7-38
Utility Reference
Hitachi Dynamic Link Manager User Guide for Linux ®