HP Hitachi Dynamic Link Manager Software - Manual (Page 617)

Message ID Message Text Explanation
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3 .
KAPL10936-W The file format is invalid. File
name = /etc/opt/
DynamicLinkManager/
hdlm_utillog.conf. Refer to the
Messages section of the HDLM
User's Guide for instructions to
correct this problem.
Details
The format of the settings file for
the HDLM utility log (/etc/opt/
DynamicLinkManager/
hdlm_utillog.conf) is invalid.A
maximum log file size of 1024 KB
will be assumed, and the
processing of the dlmcfgmgr
utility will continue.
Action
Execute the dlmcfgmgr utility
with the -logfs parameter
specified. If the error occurs
again, /etc/opt/
DynamicLinkManager/
hdlm_utillog.conf which is not a
regular file might exist. Delete /
etc/opt/DynamicLinkManager/
hdlm_utillog.conf and then
execute the dlmcfgmgr utility
again. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10937-W The maximum number of paths
was exceeded. Revise the
configuration so that the
number of paths is less than, or
the same as, the maximum
number. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
The number of paths in the entire
system exceeded the maximum
number of paths supported in
HDLM. Review and, if necessary,
revise the configuration.
Action
The maximum number of paths
supported in HDLM has been
exceeded. Review and, if
necessary, revise the number of
paths in the entire system. For
details on the number of paths
supported in HDLM, see Number
of LUs and Paths That Are
Supported in HDLM on page 3-85 .
KAPL10938-I dlmcfgmgr Log File Size(KB) :
aa...aa
Details
aa...aa: The setup value or default
value of dlmcfgmgr Log File Size.
Action
None.
Messages
8-105
Hitachi Dynamic Link Manager User Guide for Linux ®