HP Hitachi Dynamic Link Manager Software User Manual

Page 212

initrd=/boot/initrd-2.6.18-194.el5

read-only

append="root=LABEL=/"

LABEL is set in the underlined section.

For Red Hat Enterprise Linux 6, also check whether the block device

names (udev names) starting with UUID= are specified as shown in the

following underlined part below:

title Red Hat Enterprise Linux (2.6.32-71.el6.i686)

root (hd0,0)

kernel /vmlinuz-2.6.32-71.el6.i686 ro

root=UUID=55574d05-07dc-4c94-a585-5599c284d79b rd_NO_LUKS

rd_NO_LVM rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc

KEYTABLE=jp106 crashkernel=auto rhgb quiet

initrd /initramfs-2.6.32-71.el6.i686.img

If the OS is SUSE LINUX Enterprise Server, also check whether the device

names (udev names) starting with the /dev/disk directory are specified

as shown in the following underlined part below. In the following

example, GRUB is used as the boot loader with Xen kernels. For details on

title XEN

root (hd0,1)

kernel /boot/xen.gz

module /boot/vmlinuz-2.6.16.60-0.21-xen root=/dev/disk/by-id/

scsi-1HITACHI_D60H03750027-part2 vga=0x31a resume=/dev/sda1

splash=silent showopts

module /boot/initrd-2.6.16.60-0.21-xen

If LABEL or the device name (udev name) was not used in step 3 and step

4, proceed to step 17 and install a new instance of HDLM.
If the device name (udev name) has been specified, replace LABEL with

the device name (udev name) when reading the steps below.

Execute the mount command to check the mounted file system.
Check the correspondence between the SCSI device and LABEL that you

checked in steps 3 and 4. You will need this information to remove the
LABEL setting.

# mount

/dev/sda2 on / type ext2 (rw)

/dev/sda1 on /boot type ext2 (rw)

/dev/sda4 on /tmp type ext2 (rw)

/dev/sda5 on /var type ext2 (rw)

/dev/sda6 on /usr type ext2 (rw)

none on /dev/shm type tmpfs (rw)

3-140

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide for Linux

This manual is related to the following products: