HP Hitachi Dynamic Link Manager Software User Manual
Page 214
11
.
Copy the startup configuration that has the LABEL specification, which is
contained in the boot loader configuration file.
The following shows an example configuration. Note that option in the
example represents an option that can be specified to suit the user
environment.
¢
When GRUB is used as the boot loader with Xen kernels:
For details on Xen kernels, see
Table 3-61 Xen Hypervisor Operating
Environments Supported by HDLM on page 3-88
:
:
title XEN
root (hd0,1)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.16.60-0.21-xen root=/dev/disk/by-
id/scsi-1HITACHI_D60H03750027-part2 vga=0x31a resume=/dev/
sda1 splash=silent showopts
module /boot/initrd-2.6.16.60-0.21-xen
¢
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see
.
:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option root=LABEL=/
option
initrd /initrd-2.6.18-194.el5
¢
When LILO or ELILO is used as the boot loader:
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=linux
initrd=/boot/initrd-2.6.18-194.el5
read-only
append="option root=LABEL=/ option"
12
.
Change the name of the configuration contained in the boot loader
configuration file.
Change the name of the configuration that you copied in step 11. You can
assign any name that indicates that the configuration is used for
specifying the SCSI device.
¢
When GRUB is used as the boot loader:
Change the underlined text as follows:
Before:
title Red Hat Enterprise Linux (2.6.18-194.el5)
After:
3-142
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux
®