HP Hitachi Dynamic Link Manager Software - Manual (Page 218)

# blkid /dev/sda2
/dev/sda2: UUID="19597725-5d20-4d1d-9906-f9f891b7711a"
TYPE="ext4"
#
c
.
Change the root specification in the configuration that you copied
in step 23 to the UUID checked above.
root=UUID=19597725-5d20-4d1d-9906-f9f891b7711a
¢
For OSs other than the above:
Delete the root specification in the configuration that you copied in
step 23. If you are using a Xen kernel, delete the root device
specification in module. For details on Xen kernels, see Table 3-61 Xen
Hypervisor Operating Environments Supported by HDLM on page
3-88 .
26
.
Specify the initial RAM disk image file created in step 19 for initrd
contained in the boot loader configuration file.
Change the initrd specification in the configuration that you copied in
step 23.
If you are using a Xen kernel, change the initrd file name specified in
module to the initial RAM disk image file you created in step 19. For
details on Xen kernels, see Table 3-61 Xen Hypervisor Operating
Environments Supported by HDLM on page 3-88 .
Keep in mind that the specification method for initrd differs depending
on the boot loader.
If any options have been specified to suit the user environment, take care
not to delete those options.
27
.
If SUSE LINUX Enterprise Server is used, delete the resume setting
contained in the boot loader configuration file.
Delete the resume specification contained in the configuration that you
copied in step 23. If resume is set for the kernel parameter, delete the
resume setting, because it is not supported by HDLM.
28
.
In the boot loader configuration file, edit the settings to be used during a
boot.
¢
When GRUB is the boot loader
Change the default number so that a boot can be performed using
the configuration copied in step 23.
default= 3
¢
When LILO or ELILO is used as the boot loader:
Specify label for default.
default linux-HDLM
29
.
If LILO is used as the boot loader, execute the /sbin/lilo command to
have the new settings take effect.
30
.
Shut down the host.
Execute the following command to shut down the host:
3-146
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux ®