HP Hitachi Dynamic Link Manager Software - Manual (Page 544)

Message ID Message Text Explanation
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04003-E The startup parameter is invalid. Details
The HDLM manager internal
parameter is invalid.
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04004-I HDLM manager will now
terminate.
Action
None.
KAPL04008-E Cannot open the option
definition file (aa...aa).
Details
HDLM manager could not start
normally because it was unable to
open the option definition file.
aa...aa: Option definition file
name
Action
Check whether another program is
currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009-E The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then check
the option settings.
Use the dlnkmgr set operation to
return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
8-32
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®