HP Hitachi Dynamic Link Manager Software - Manual (Page 423)

Specifies the checking interval (in minutes) for reviewing information
about switching of controllers performed by the storage system which is
used in the dynamic I/O path control function. Specify a value in the
range from 1 to 1440. The default value is "10".
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
To Display the Format of the Set Operation
-help
Displays the format of the set operation.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio | lbk |
exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb on [ -intvl Interval-Time ]
| -afb off
| -iem on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
| -lic
| -audlog on
[ -audlv AudlogLevel ]
[ -category Category-Value ]
| -audlog off
| -audfac { Facility-Name | Facility-Number }
| -lbpathusetimes Number-Of-PathUseTimes
| -expathusetimes Number-Of-ExPathUseTimes
| -dpc { on | off } [-pathid AutoPATH_ID { -lu | -
storage } ]
| -dpcintvl Dpc-Interval
}
[-s]
Valid value
ElogLevel { 0 | 1 | 2 | 3 | 4 } (Default Value 3)
ElogFileSize { 100 - 2000000 }(KB) (Default Value
9900)
Number-Of-ElogFiles { 2 - 16 }(Files) (Default Value 2)
Command Reference
6-29
Hitachi Dynamic Link Manager User Guide for Linux ®