HP Hitachi Dynamic Link Manager Software - Manual (Page 328)

¢
When the boot loader is LILO or GRUB
The following shows an example of executing the mount command.
Figure 3-44 Example of Executing the mount Command
When the Boot Loader Is LILO or GRUB
¢
When the boot loader is ELILO running on an IPF host
The following shows an example of executing the mount command.
Figure 3-45 Example of Executing the mount Command
When the Boot Loader Is ELILO
Refer to the /proc/swaps file to make sure that the specified SCSI device
name is displayed in the Filename column.
Go to step 18.
16
.
Update the information about the volume group.
Execute the following command to update the information about the
volume group.
# vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
17
.
Check the relationship between the volume group and HDLM devices.
Execute the following command to make sure that the physical volumes
that make up the volume group are not HDLM devices.
3-256
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux ®