HP Hitachi Dynamic Link Manager Software - Manual (Page 300)

Figure 3-34 Example of Executing the dlnkmgr Command's View
Operation (With -drv Specified)
In the example, the name of the logical device file of the HDLM device
that corresponds to /dev/sda can be identified as sddlmaa.
2
.
Add the name of the logical device file of the HDLM device that was
confirmed in step 1 to the /etc/fstab file.
The following is an example of editing the /etc/fstab file:
¢
For FC-SAN environments
/dev/sddlmaa /mnt/sda ext2 defaults 0 0
¢
For IP-SAN environments
• If the OS is Red Hat Enterprise Linux 5.6, Red Hat Enterprise
Linux 5.6 Advanced Platform, Red Hat Enterprise Linux 5.7, Red
Hat Enterprise Linux 5.7 Advanced Platform, Red Hat Enterprise
Linux 5.8, Red Hat Enterprise Linux 5.8 Advanced Platform, Red
Hat Enterprise Linux 5.9, Red Hat Enterprise Linux 5.9 Advanced
Platform, or Red Hat Enterprise Linux 6:
/dev/sddlmaa /mnt/sda ext2 _netdev 0 0
• If the OS is SUSE LINUX Enterprise Server 11:
/dev/sddlmaa /mnt/sda ext2 nofail 0 0
This example adds a line for /dev/sddlmaa (name of the logical device file
of the HDLM device). For IP-SAN environments, specify _netdev or
nofail for the mount option.
3
.
Restart the host or manually mount the HDLM device.
HDLM-managed devices are mounted by using the logical device file name
of the HDLM device.
3-228
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux ®