HP Hitachi Dynamic Link Manager Software - Manual (Page 562)

Message ID Message Text Explanation
¢
When a path error is detected
through an I/O error
Displays the OS error code.
cc...cc: 0x00000000 (fixed)
Action
Check the path in which the error
was detected.
KAPL08022-E A path error occurred.
ErrorCode = aa...aa, PathID =
bb...bb, PathName =
cc...cc.dd...dd.ee...ee.ff...ff,
DNum = gg...gg, HDevName =
hh...hh
Details
A physical or logical error occurred
in the path.
aa...aa: OS error code
(hexadecimal number)
¢
When a path error is detected
by a path health checking or
the online operation
Displays 0x000F0000 (Fixed).
¢
When a path error is detected
through an I/O error
Displays the OS error code.
bb...bb: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
cc...cc: Host port number (same
as PathName of view -path)
(hexadecimal number)
dd...dd: Bus number (same as
PathName of view -path)
(hexadecimal number)
ee...ee: Target ID (same as
PathName of view -path)
(hexadecimal number)
ff...ff: HLU number (same as
PathName of view -path)
(hexadecimal number)
gg...gg: Dev number (same as
DNum of view -path) (decimal
(base-10) number)
hh...hh: Host device name (same
as HDevName of view -path)
Action
There could be an error in the
path. See What To Do for a Path
Error on page 5-3 and restore the
path displayed in the message to
running status.
If the Offline (E) path has a
PathName target ID value that is
0000000000000100 or more, it
cannot be brought online by the
8-50
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®