HP Hitachi Dynamic Link Manager Software - Manual (Page 410)

Parameters
To Set Up the HDLM Operating Environment
The table below shows the defaults and recommended values for each
setting. If you change the value of the set operation, the new value takes
effect immediately.
Table 6-2 Default and Recommended Values
Item name Default value Recommended value
Load balancing on
The Extended Least I/Os
algorithm is used.
on
The recommended algorithm
depends on the operating
environment.
Error log collection
level
3: Collect error information for
the Information level and
higher.
3: Collect error information for
the Information level and higher.
Error log file size 9900 (KB) 9900 (KB)
Number of error
log files
2 2
Trace level 0: Do not output any trace. 0: Do not output any trace.
Trace file size 1000 (KB) 1000 (KB)
Number of trace
files
4 4
Path health
checking
on (Interval is 30 minutes.) on
The recommended checking
interval depends on the operating
environment.
Automatic failback on (Interval is 1 minutes.) The recommended checking
interval depends on the operating
environment.
Intermittent error
monitoring
off off
Collecting audit log
data
off The recommended value depends
on the operating environment.
Set on, if you want to collect
audit log data.
Audit log facility user local0 to local7
#
Number of times
the same path can
be used for load
balancing
32 The recommended value depends
on the operating environment.
Number of times
the same path can
be used for
100 The recommended value depends
on the operating environment.
6-16
Command Reference
Hitachi Dynamic Link Manager User Guide for Linux ®