HP Hitachi Dynamic Link Manager Software - Manual (Page 630)

Message ID Message Text Explanation
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM vendor
or the maintenance company if
there is a maintenance contract for
HDLM. For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3 .
For dlmmkinitrd:
Perform the following confirmation
corresponding to the output
command, and then retry.
Re-execute the dlmmkinitrd utility
for supporting the boot disk after
performing the next check according
to the outputted command.
And if the error message is
outputted before this message,
remove the cause of the error with
reference to the contents of the
message.
cp:
Confirm that there is enough
unused capacity and that the
user has write permission in the
root directory (/).
cpio or dd:
Confirm that there is enough
unused capacity and that the
user has write permission in
the /etc/opt/
DynamicLinkManager directory.
dlmcfgmgr:
• Confirm that the version of
the OS has not changed
since you made the initial
ramdisk image file.
• Take action according to
the contents output in the
log of the dlmcfgmgr utility.
• Confirm that the user has
write permission in the root
directory (/).
dlnkmgr:
• Confirm that HDLM has
been configured.
• Take action according to
the contents output in the
log of the dlmcfgmgr utility.
8-118
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®