HP Hitachi Dynamic Link Manager Software - Manual (Page 644)

Message ID Message Text Explanation
/etc/opt/
DynamicLinkManager/.dlm_modules.co
nf.lock
KAPL12553-W Usage: /opt/
DynamicLinkManager/bin/
dlmsetopt {-r retrycount |
-inqt InquiryTimeout | -
inqr InquiryRetry | -prsup
ReserveStatus | -h}
Action
Refer to dlmsetopt Utility for Setting
HDLM Driver Options on page 7-37 , and
then specifying the correct argument.
Then, re-execute the dlmsetopt utility.
KAPL12554-I The utility for setting
HDLM driver option has
started.
Action
None.
KAPL12555-I The utility for setting
HDLM driver option
completed normally.
Action
None.
KAPL12556-I An attempt to execute the
utility for setting HDLM
driver option has failed.
Action
Check the action recommended in the
error message output before this
message, and take action accordingly.
KAPL12557-I The user stopped the
utility for setting HDLM
driver option.
Details
Even if the message KAPL12555-I is
output before this message, the contents
set by the execution of the dlmsetopt
utility will have no effect and the
settings will return to the state before
the execution.
Action
If necessary, re-execute the dlmsetopt
utility.
KAPL12558-I Please restart the
computer so that the
option settings take
effect.
Action
Restart the computer.
KAPL12559-E An invalid value was
specified in the
parameter. Option =
aa...aa, Parameter =
bb...bb
Details
aa...aa: Option
bb...bb: Specified parameter(Maximum
10 characters. If there are more than 10
characters, only 10 characters will be
output followed by ...)
Action
Refer to dlmsetopt Utility for Setting
HDLM Driver Options on page 7-37 , and
then specifying the correct argument.
Then, re-execute the dlmsetopt utility.
KAPL12560-E An option is not specified. Action
Refer to dlmsetopt Utility for Setting
HDLM Driver Options on page 7-37 ,
8-132
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®