HP Hitachi Dynamic Link Manager Software - Manual (Page 241)

Figure 3-15 Example of Editing /etc/lvm/lvm.conf file
Comment out the existing filter and types lines, and add the shaded
lines in the figure.
In addition, set md_component_detection to its original value before
installation.
8
.
Edit the boot loader configuration file so that the OS will start with a SCSI
device specified.
Edit the boot loader configuration file as shown in
Figure 3-16 Example of
Editing /etc/grub.conf file on page 3-169 , Figure 3-17 Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen)
on page 3-170 , and Figure 3-18 Example of Editing /etc/elilo.conf file on
page 3-170 .
If you are using SUSE LINUX Enterprise Server, check the /boot/grub/
menu.lst file instead of the /etc/grub.conf file.
Examples of editing the configuration file are shown below. See the
example for the boot loader you are using.
The detailed procedure is explained in steps 9 to 14.
Figure 3-16 Example of Editing /etc/grub.conf file
Creating an HDLM Environment
3-169
Hitachi Dynamic Link Manager User Guide for Linux ®