HP Hitachi Dynamic Link Manager Software - Manual (Page 503)

This directory is created in directory-to-which-collected-information-is-
output specified when the installgetras utility was executed.
installhdlm Utility for Installing HDLM
You can use this utility to perform a new installation, upgrade installation, or
re-installation of HDLM.
The utility can also be used to perform an unattended installation. An
unattended installation enables a user to install HDLM without entering
information. Before you perform an unattended installation, you must define
the information required for installation in the installation-information
settings file.
For details about how to perform an unattended installation, see Installing
HDLM on page 3-96 .
Format
mount-point-of-HDLM-installation-media/installhdlm [-v | -h | [-f
installation-information-settings-file-name]
Parameters
-v
Displays the version of HDLM to be installed.
-h
Displays the format of the installhdlm utility.
-f installation-information-settings-file-name
Specify this parameter when performing an unattended installation of
HDLM. Specify the installation-information settings file for this parameter.
For details about the installation-information settings file, see
Editing an
Installation-Information Settings File on page 7-43 .
Editing an Installation-Information Settings File
This section describes how to edit the installation-information settings file.
How to Edit an Installation-Information Settings File
Keep the following in mind when you edit an installation-information settings
file:
• Enter keys in the order of the keys defined in the sample file
sample_installhdlm.conf.
• Enter one key and one setting per line.
• Enter values in the key-name=setting format.
Utility Reference
7-43
Hitachi Dynamic Link Manager User Guide for Linux ®