HP MPX200 Multifunction Router - Manual (Page 97)

Example
c:\> rcli remove dm_group -name="My Group" /ip=10.0.0.12
[10.0.0.12]
Data Migration Job Group "My Group" successfully removed
remove dml
The remove dml command removes a LUN from the list of data management LUNs on the router.
Some of the identifying keywords are not necessarily unique to a single LUN and can apply to to
more than one LUN. This command requires that you select a specific LUN; therefore, if the keywords
specified match more than one LUN, you must use additional keywords.
Syntax
remove dml
Keywords
Specifies the WWPN of the storage array that you want to remove. -array_wwpn=
Specifies the Fibre Channel target WWPN of the storage array that you want to
remove. -array_with_fc_target=
Specifies the iSCSI target name of the storage array that you want to remove. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN that you want to remove. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN that you want to remove. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN that you want to remove. -array_with_lun_naa
1
Specifies the Page 0x80 serial number of the storage array LUN that you want to
remove. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN that you want to remove. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN that you want to remove. -array_with_lun_wwuln
1
Specifies the symbolic name of the storage array that you want to remove. -array_with_name=
Specifies the Fibre Channel target of the LUN to delete. -fc_target=
2
Specifies the iSCSI target of the LUN to delete. -is_target=
2
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
Specifies the LUN EUI designator. -lun_eui=
3
Specifies the LUN’s NAA designator. -lun_naa=
3
Specifies the LUN to delete. -lun_number=
Specifies the LUN Page 0x80 serial number. -lun_serial=
3
Specifies the LUN T10 designator. -lun_tten=
3
Specifies the LUN WWULN. -lun_wwuln=
3
Specifies the VP group index number of the LUN to delete. -vpgindex=
1
Do not combine the keywords -array_with_lun_serial, -array_with_lun_wwuln, -array_with_lun_tten,
-array_with_lun_eui , and -array_with_lun_naa. To specify any LUN, use the -array_with_lun_any_wwuln
keyword.
2
You can use either the -fc_target or the -is_targetkeyword, but not both.
3
Do not combine the keywords -lun_serial, -lun_wwuln, -lun_tten, -lun_eui and -lun_naa. To specify any
LUN, use the -lun_any_wwuln keyword.
remove dml 97