HP MPX200 Multifunction Router User Manual

Page 113

Table 4 API error codes returned by the retval command (continued)

Description

Error

Use QRouter::addScrubLUNJob() to add a scrub LUN
job.

QAPI_E_INVALID_DM_JOB_TYPE

Data migration schedule type must be either start now or
manual start.

QAPI_E_INVALID_DM_SCHED_TYPE

Initiator is part of an array.

QAPI_E_INITIATOR_PART_OF_ARRAY

Error status received from router does not correspond to a
QAPI_RETURN

value.

QAPI_E_UNKNOWN_ERROR

LUN configuration mismatch on local and peer blade.

QAPI_E_LUN_NOT_FOUND_ON_PEER

Attempted to add something that was already there; okay
to ignore.

QAPI_S_ALREADY_EXISTS

ValidateRouterList( )

removed one or more routers

from the list because they could not connect.

QAPI_S_INVALID_QROUTER_FOUND

If the call that disabled the IPv4 management port was
made using the current IPv4 management port, no
reconnect is possible.

QAPI_S_IPV4_MANAGEMENT_PORT_SUCCESSFULLY_DISABLED

Call validateRouterList( ) to remove from the list
the routers that cannot connect.

If the call that disabled the IPv6 management port was
made using the current IPv6 management port, no
reconnect is possible.

QAPI_S_IPV6_MANAGEMENT_PORT_SUCCESSFULLY_DISABLED

Call validateRouterList( ) to remove from the list
the routers that cannot connect.

IPv4 features are correct, but IPv6 is not supported by this
device.

QAPI_S_IPV6_NOT_SUPPORTED

Migration job added successfully, but the source and
destination LUNs must be unmasked before the job can

QAPI_S_NO_OFFLINE_DM_FOR_MASKED_LUN

start. (Offline data migration cannot be done if the source
or destination LUN is masked.)

Migration job added successfully, but the destination LUN
must be unmasked before the job can start. (Online data
migration cannot be done if the destination LUN is masked.)

QAPI_S_NO_ONLINE_DM_FOR_MASKED_ DEST_LUN

Online target successfully unmapped; however, there is a
risk of users losing access to data.ÿ

QAPI_S_ONLINE_TARGET_WITH_NO_DM_
JOBS_UNMAPPED

Acknowledging job. Job will be removed after
synchronization is complete.

QAPI_S_OPERATION_INPROGRESS

Firmware upload completed successfully. Reboot required.

QAPI_S_REBOOT_REQUIRED

Could not reconnect to router after changing the
management port address.

QAPI_S_RECONNECT_FAILED

Attempt to find routers timed out; none found.

QAPI_S_TIMEOUT_NO_ROUTERS_FOUND

113