HP MPX200 Multifunction Router - Manual (Page 93)

Specifies the destination virtual port group. -dmdest_vpgindex=
Specifies the I/O size, in kilobytes, to use for data migration. Values are: -dm_io_size=
•
32
•
64 (default)
•
128
•
512
•
1024
Specifies the source array as a Fibre Channel target. -fc_target=
Specifies the name of a data migration job group. -group=
If this keyword is not used, the default value is Group 0.
Specifies the source array as an iSCSI target. -is_target=
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
Specifies the source LUN EUI. -lun_eui
4
Specifies the LUN NAA designator. -lun_naa=
4
Specifies the source LUN. -lun_number=
Specifies the LUN size in LBA blocks (512 bytes), for source and destination LUNs
in a partial LUN migration. -lun_size_lba=
Specifies the source LUN Page 0x80 serial number. -lun_serial=
4
The serial number can contain special characters. To ensure that these characters
are interpreted correctly when running in a Linux shell, be sure to enclose the input
text for Page 0x80 serial numbers in single quotation marks (not double quotation
marks).
Specifies the source LUN starting block for a partial LUN migration. -lun_start_lba=
Specifies the source LUN T10 designator. -lun_tten=
4
Specifies the source LUN WWULN. -lun_wwuln=
4
Specifies that the data migration job starts as part of a serial scheduled job, and
specifies the priority. Values are 1 to 256. -priority=
5
When used with -dm_type=scrub, this keyword specifies the method to be used
for scrubbing the LUN. -scrub_algorithm=
•
zero_clean (default)
•
dod_5220_22_m
•
dod_5220_22_m_e
•
dod_5220_22_m_ece
This keyword is ignored for all other data migration job types.
Specifies that the data migration job starts immediately. -start_now
5
Specifies a future time for starting the data migration job in the format
"MM/DD/YYYY HH:MM:SS" -time=
5
Specifies that the destination LUN is thin-provisioned. -tp_dest
Do not use this keyword for compare jobs.
Specifies that the destination LUN is thin-provisioned. Adding validation to the data
migration job slows performance, but it allows you to use thin-provisioned destination
LUNs that have previously initialized contents. -tp_dest_with_validation
add migration 93