HP MPX200 Multifunction Router - Manual (Page 12)

2 General keywords
This chapter provides the description and syntax for keywords that apply to all commands. Because
these keywords are defined here, they are not repeated for every command in the command
reference chapters.
General keywords
The keywords in this section apply to all commands.
-blade
Use the -blade keyword to specify the primary or secondary router blade (MPX200 only). When
specified, the blade selection is saved for future use as the default.
Syntax
-blade=[primary | secondary | 1 | 2]
Options
Use the router with management port at the specified IP address. 1
Use the peer router in the same chassis as the primary router. 2
Use the router with management port at the specified IP address. primary
Use the peer router in the same chassis as the primary router. secondary
-dmpw
Use the -dmpw keyword to provide the data migration password, if one has been set.
Syntax
-dmpw= password
-echo
Use the -echo keyword to display a copy of the command line and other text output to the console
or to a text file, if specified.
Syntax
-echo=filename
-help
Use the -help keyword to display command syntax and available keywords. This is the same
information that appears if you enter incorrect command syntax. Including this keyword is optional
and blocks all other effects of the command.
Syntax
-help[=file_name]
Examples
To display the help summary for the show system command:
c:\> rcli show system -help
To save the help summary for the show system command in a Microsoft Word file:
12 General keywords