HP MPX200 Multifunction Router - Manual (Page 28)

To view detailed information for a single storage array, use the show array command. See
“show array” (page 63) .
Syntax
list array
Examples
c:\> rcli list array /ip=10.0.0.12
[10.0.0.12]
Array count = 1
-array_wwpn=0000-0100-0100-0000
list host
The list host command lists the names of all hosts known to the router. To view detailed
information for a specific host, use the show host command instead.
Syntax
list host
Keywords
This command has no specific keywords. For an explanation of the general keywords that apply
to all commands, see
“General keywords” (page 12)
Examples
c:\>rcli list host /ip=10.0.0.12
[10.0.0.12]
Host count = 3
-host_id=myHost_1 —ostype=win2k8
-host_id=myHost_2 —ostype=win2k8
-host_id=myHost_3 —ostype=win2k8
list initiator
The list initiator command lists the names of all initiators known to the router.
NOTE: To view detailed information for a specific initiator, use the show initiator command.
Syntax
list initiator
Example
c:\> rcli list initiator /ip=10.0.0.12
[10.0.0.12]
Initiator count = 3
-fc_initiator=2101-00E0-8B3A-E348
(Logged Out)
-is_initiator=iqn.1986-03.com.hp:fcgw.mpx200.dm.initiator
-iscsi_name=iqn.1986-03.com.hp:fcgw.mpx200.dm.initiator -ostype=win2k3
(Data Migration)
-is_initiator=iqn.1991-05.com.microsoft:abcdef12
-iscsi_name=iqn.1991-05.com.microsoft:abcdef12 -ostype=win2k3
(Logged Out)
28 Command reference