HP MPX200 Multifunction Router - Manual (Page 90)

Example
c:\> rcli add dm_group -name="My Group" /ip=10.0.0.12
[10.0.0.12]
nl
Data Migration Job Group "My Group" successfully added
add dml
The add dml command adds a LUN to the list of data management LUNs on the router.
LUN identifiers are not necessarily unique to a single LUN. If combined with other keywords, it is
possible that the LUN keywords can refer to more than one LUN. This command requires that you
select a specific LUN; therefore, if the keywords specified match more than one LUN, you must
use additional keywords.
Syntax
add dml
Keywords
Specifies the WWPN of the storage array that you want to add. -array_wwpn=
Specifies the Fibre Channel target WWPN of the storage array that you want to
add. -array_with_fc_target=
Specifies the iSCSI target name of the storage array that you want to add. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN that you want to add. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN that you want to add. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN that you want to add. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN that you want to
add. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN that you want to add. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN that you want to add. -array_with_lun_wwuln=
1
Specifies the symbolic name of the storage array that you want to add. -array_with_name=
Specifies the Fibre Channel target for the new data management LUN. -fc_target=
2
Specifies the iSCSI target for the new data management LUN. -is_target=
2
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
Specifies the LUN EUI designator. -lun_eui=
3
Specifies the LUN NAA designator. -lun_naa=
3
Specifies the LUN to add. -lun_number=
Specifies the LUN Page 0x80 serial number. -lun_serial=
3
The serial number can contain special characters. To ensure that these characters
are interpreted correctly when running in a Linux shell, be sure to enclose the input
text for Page 0x80 serial numbers in single quotation marks (not double quotation
marks).
90 Data Migration commands