HP MPX200 Multifunction Router - Manual (Page 41)

remove fcip_route
The remove fcip_route command removes one FCIP route.
Syntax
remove fcip_route -fc_port=Fibre Channel port number
NOTE: The router must be capable and licensed for FCIP. To view router capabilities, issue the
show features command.
Example
c:\> rcli remove fcip_route -fc_port=1 /ip=10.0.0.12
[10.0.0.12]
FCIP route successfully removed
remove initiator
The remove initiator command deletes an existing initiator.
Syntax
remove initiator
Keywords
Specifies the symbolic name for the host from which the initiator is to be deleted. —host id
Specifies the name of the Fibre Channel initiator to be deleted. -fc_initiator
Specifies the name of the iSCSI initiator to be deleted. -is_initiator
NOTE: You must specify either the -fc_initiator or -is_initiator keyword, but not
both.
Example
c:\>rcli remove initiator -fc_initiator=2101-00E0-8B3A-E348 /ip=10.0.0.12
[10.0.0.12]
Initiator successfully removed
remove lunmask
The remove lunmask command removes a LUN mask from the list known to the router.
Syntax
remove lunmask
NOTE: You must specify either the -fc_initiator or -is_initiator keyword, but not
both.
You must specify either the -fc_target or -is_target keyword, but not both.
Keywords
Specifies the WWPN of the storage array for which you want to view detailed
information. -array_wwpn=
remove fcip_route 41