HP MPX200 Multifunction Router - Manual (Page 42)

If this keyword is not used, the command displays detailed information for all storage
arrays.
Specifies the Fibre Channel target WWPN of the LUN mask that you want to remove. -array_with_fc_target=
Specifies the iSCSI target name of the LUN mask that you want to remove. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the LUN
mask that you want to remove. -array_with_lun_any_wwuln=
Specifies the EUI of the LUN mask that you want to remove. -array_with_lun_eui=
1
Specifies the NAA of the LUN mask that you want to remove. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the LUN mask that you want to remove. -array_with_lun_serial=
1
Specifies the T10 designator of the LUN mask that you want to remove. -array_with_lun_tten=
1
Specifies the WWULN of the LUN mask that you want to remove. -array_with_lun_wwuln=
1
Specifies the symbolic name of the LUN mask that you want to remove. -array_with_name=
Specifies the Fibre Channel initiator name for which you want to remove a LUN
mask. -fc_initiator=
Required, unless the -host_id or -is_initiator keyword is used instead.
Specifies the Fibre Channel target name for which you want to remove a LUN mask. -fc_target=
Required, unless the -is_target keyword is used instead.
Required, unless the —fc_initiator or —is_initiator keyword is used instead. -host_id=
Specifies the symbolic name for a host for which you want to remove a LUN mask.
Specifies the iSCSI initiator name for which you want to remove a LUN mask. -is_initiator=
Required, unless the -host_id or -fc_initiator keyword is used instead.
Specifies the iSCSI target name for which you want to remove a LUN mask. -is_target=
Required, unless the -fc_target keyword is used instead.
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
2
Specifies the LUN EUI. -lun_eui=
2, 3
Specifies the LUN NAA designator. -lun_naa=
2, 3
Specifies the LUN for which you want to remove a LUN mask. -lun_number=
Specifies the LUN Page 0x80 serial number. -lun_serial=
2, 3
The serial number can contain special characters. To ensure that these characters
are interpreted correctly when running in a Linux shell, enclose the input text for Page
0x80 serial numbers in single quotation marks (not double quotation marks).
Specifies the LUN T10 designator. -lun_tten=
3
Specifies the LUN WWULN. -lun_wwuln =
2, 3
Specifies a LUN for use by host initiators that can be different from the LUN used on
the target storage. -remap_lun_number=
If remapping a LUN for use by a host initiator, this keyword indicates use of the
global iSCSI target (IGMAP). -use_iscsi_global_target
Specifies the VP group index number for the LUN. -vpindex=
1
Do not combine the keywords -array_with_lun_serial, -array_with_lun_wwuln, -array_with_lun_tten,
-array_with_lun_eui , and -array_with_lun_naa. To specify any LUN, use the -array_with_lun_any_wwuln
keyword.
2
This keyword is supported with router firmware Version 3.2.3.0 or later.
3
Do not combine the keywords -lun_serial, -lun_wwuln, -lun_tten, -lun_eui and -lun_naa. To specify any
LUN, use the -lun_any_wwuln keyword.
42 Command reference