Enable fc_port, Enable iscsi_port, Execute script – HP MPX200 Multifunction Router User Manual

Page 25: Enable fc_port enable iscsi_port execute script

Syntax

enable beacon

Example

c:\> rcli enable beacon /ip=10.0.0.12

[10.0.0.12]

Beacon successfully turned ON

enable fc_port

The enable fc_port command enables the specified Fibre Channel port.

Syntax

enable fc_port -port=port number

Example

c:\> rcli enable fc_port -port=1 /ip=10.0.0.12

FC Port 0 successfully enabled

enable iscsi_port

The enable iscsi_port command enables the specified iSCSI port.

Syntax

enable iscsi_port -port=port number

Keyword

Specifies the port number of the iSCSI port to enable.

-port

Example

c:\> rcli enable iscsi_port -port=1 /ip=10.0.0.12

iSCSI Port 0 successfully enabled

execute script

The execute script command executes a list of Remote CLI commands read in from a script
file.

Syntax

execute script —file=script file name

NOTE:

If the file name does not specify a directory, the current working directory is the default.

Keyword

Prevents the script execution from stopping (the typical behavior) when it encounters
an error.

-continue_on_error

Example

c:\> rcli execute script -file=config_script.txt

enable fc_port