HP MPX200 Multifunction Router - Manual (Page 61)

•
true
• false
The default is the current setting on the router.
Specifies a symbolic name for the router. -name=
The name can be blank, or contain a maximum of 63 alphanumeric characters,
spaces, and symbols.
Specifies whether SSH is enabled or disabled for the router. Values are: -ssh=
•
yes
•
no
• on
•
off
• true
•
false
The default is the current setting on the router.
Specifies whether target access control is enabled or disabled. Values are: -target_access_control=
•
yes
•
no
• on
•
off
• true
•
false
The default is the current setting on the router.
Specifies the target presentation mode. Values are: -target_presentation_mode=
•
auto
•
manual
The default is the current setting on the router.
Specifies whether Telnet is enabled or disabled for the router. Values are: -telnet=
•
yes
• no
•
on
• off
•
true
•
false
The default is the current setting on the router.
Example
c:\> rcli set system -lun_mapping=off /ip=10.0.0.12
[10.0.0.12]
nl
setBridgeInfo completed successfully
*** REBOOT REQUIRED ***
set time
The set time command sets the date and time on the router.
NOTE: You must use one of the optional keywords.
set time 61