HP MPX200 Multifunction Router - Manual (Page 40)

Keywords
Specifies the name of a file that contains either the binary or text unique ID for RCLI.
If a directory is not specified with the filename, the default is the working directory.
-file=
1
Specifies as a text string the unique ID for RCLI. -id=
1
1
You can use either the -id or -file keyword, but not both. If neither keyword is used, this command creates a default,
unique identifier for RCLI.
Example
c:\> rcli register system -file=rcli_id.dat
RCLI management client registered successfully
remove array
The remove array command removes an offline storage array.
Syntax
remove array
Keyword
Specifies the WWPN of the storage array that you want to remove. -array_wwpn=
Specifies the Fibre Channel target WWPN of the storage array that you want to
remove. -array_with_fc_target=
Specifies the iSCSI target name of the storage arraythat you want to remove. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN that you want to remove. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN that you want to remove. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN that you want to remove. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN that you want to
remove. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN that you want to remove. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN that you want to remove. -array_with_lun_wwuln=
1
Specifies the symbolic name of the storage array that you want to remove. -array_with_name=
Specifies what to do with any licenses currently applied to the array that is to be
removed. Values are: -license=
•
discard —Specifies that no licenses are stored for future use.
•
error —Specifies that if the array is licensed, the operation fails with an error
message indicating that you must specify what to do with the license.
•
keep —Specifies that the licenses (maximum 128) are kept in persistent data
and reused if the same array later becomes available.
The default is error.
1
Do not combine the keywords -array_with_lun_serial, -array_with_lun_wwuln, -array_with_lun_tten,
-array_with_lun_eui , and -array_with_lun_naa. To specify any LUN, use the -array_with_lun_any_wwuln
keyword.
Example
c:\> rcli remove array -array_wwpn=0000-0100-0100-0000 /ip=10.0.0.12
Storage Array 0000-0100-0100-0000 successfully removed
40 Command reference